Waterco FPI Swimming Pool Filter Top Lid 40mm Top Mount Valve and O-Ring Generic

This is a generic pool filter lid. The original manufacturer part is no longer available.

This lid was used on the top mount sand filters. As these are older style of lids, we also are including a new fabricated O-Ring.

• THE DIAMETER IS 270MM  60MM BETWEEN BOLT HOLES 105MM BETWEEN THE TWO LARGE HOLES
• As the fabrication of these lids is flat. There is a little prompting required to do the brass bolts up. But the lid will form the dome once in place.
• Is best also to use a 100% silicone grease to lubricate the o-ring.
• Suited to the 40mm Multi-Port Valve which is top-mounted on the filter.

What’s in the box:

– Generic Waterco FPI filter lid.

– Fabricated o-ring.